R W Badland home page of the UK based antenna suppliers View the range of antennas we supply and manufacture Contact Badland Antenna suppliers and manufacturers Track your antenna that we are supplying to you View the documentation provided by the manufacturers of your antenna Sign up for a trade account so we can supply antennas to your designs Read all about the latest antenna products we are manufacturing View your shopping basket and purchase your antennas
 
48 products found
Frequency Selector:
Displaying products 1 to 8 of 48
 
CABMAGKIT P.M.R. MAGNETIC MOUNT manufactured by badland antennas
P.M.R. MAGNETIC MOUNT (Product ID: CABMAGKIT)
Description Magnetic base, lightweight hi-strength. 4 rare earth magnets moulded over a non-scratch base. Extremely popular for inexpensive taxi mount for VHF and UHF radios. Removable lead (MAGL6MM) for replacement spare. Fitted with 500mm whip (black chrome) fully waterproof. The most used taxi kit in the UK!!!
Frequency UHF,VHF,TETRA,
Polarity VERTICAL
Gain 2 dbi
VSWR 1.5 : 1
Dimensions Height: WITH WHIP 550mm    Length: N/ADiameter: 60 mm
Cable 5.00 metres of RG58CU
Connector TO BE SPECIFIED
Power 40 WATTS
Impedance 50 OHM
Trade Price Log on to see trade prices
 
MAXMAGKIT P.M.R. MAGNETIC MOUNT manufactured by badland antennas
P.M.R. MAGNETIC MOUNT (Product ID: MAXMAGKIT)
Description Magnetic mount kit complete suitable for VHF and UHF radio. Single hi-strength rare earth magnet encased in rubber mould with 1/4 wave whip fitted. This small but powerful magnet has the advantage of low loss RG58CU cable fitted.
Frequency UHF,VHF,TETRA,
Polarity VERTICAL
Gain 2 DBi
VSWR SELF TUNE - CUT WHIP TO FREQUENCY
Dimensions Height: 550mm WITH WHIP    Width: N/A    Length: N/ADiameter: 39mm AT BASE
Cable 5.00 metres of RG58CU
Connector
Power 40 WATTS
Impedance 50 OHM
Trade Price Log on to see trade prices
 
MMMLB MAGNETIC MOBILE MOUNT manufactured by badland antennas
MAGNETIC MOBILE MOUNT (Product ID: MMMLB)
Description HIGH STRENGTH MINARET MAGNETIC MAG MOUNT FITTED WITH ENCLOSED WOUND BASE COIL ENABLING USE OF A SHORT WHIP FOR LOW BAND FREQUENCIES 66 – 88 MHZ
Frequency VHF,LOW BAND,
Polarity VERTICAL
Gain 2 DBi
VSWR SELF TUNE - CUT WHIP TO FREQUENCY
Dimensions Height: WITH BASE COIL AND WHIP 500 MM    Width: N/A    Length: N/ADiameter: OVAL BASE 30MMX 25MM
Cable 5.00 metres of RG174
Connector TO BE SPECIFIED
Power 25 WATTS
Impedance 50 OHM
Trade Price Log on to see trade prices
 
PROMAGHAL P.M.R. MAGNETIC BASES manufactured by badland antennas
P.M.R. MAGNETIC BASES (Product ID: PROMAGHAL)
Description Hi strength magnetic base, with 6 rare earth magnets fully overmoulded to prevent scratching paint surface. Removeable repair lead (MAGHAL) fully waterproof. Suitable for fitment of hinge adaptor (HAL) also used for long low band whips.
Frequency ,
Polarity N/A
Gain N/A
VSWR N/A
Dimensions Height: 44mm TO HAL FOOT    Width: N/A    Length: N/ADiameter: 70 mm
Cable 5.00 metres of RG58CU ( REMOVABLE LEAD )
Connector TO BE SPECIFIED
Power 40 WATTS
Impedance 50 OHM
Trade Price Log on to see trade prices
 
CABMAG6MM P.M.R. MAGNETIC BASES manufactured by badland antennas
P.M.R. MAGNETIC BASES (Product ID: CABMAG6MM)
Description Rubber overmoulded hi-strength magnetic mount 70mm diameter for 6ML (no plug)
Frequency GSM,
Polarity N/A
Gain N/A
VSWR N/A
Dimensions Height: N/A    Width: N/A    Length: N/ADiameter: 70 MM
Cable 5.00 metres of RG58 CU
Connector TO BE SPECIFIED
Power 35 WATTS
Impedance 50 ohms
Trade Price Log on to see trade prices
 
6ML MOBILE MOUNT ADAPTOR manufactured by badland antennas
MOBILE MOUNT ADAPTOR (Product ID: 6ML)
Description Screw on whip lug (ferrule) antenna whip to 6mm thread either in black or chrome. Suitble for CABMAG6MM.
Frequency ,
Polarity N/A
Gain N/A
VSWR N/A
Dimensions Height: N/A    Width: N/A    Length: N/ADiameter: N/A
Cable 0.00 metres of N/A
Connector N/A
Power N/A
Impedance N/A
Trade Price Log on to see trade prices
 
BCC MOBILE ANTENNA BODY MOUNT manufactured by badland antennas
MOBILE ANTENNA BODY MOUNT (Product ID: BCC)
Description Moulded feeder boot clip mount, suitable to accept hinge adaptor(HAL). Fitted to vehicle boot lids. Cable supplied but no hinge.
Frequency
Polarity
Gain
VSWR
Dimensions
Cable 5.00 metres of RG58CU
Connector
Power 35 WATTS
Impedance 50 OHM
Trade Price Log on to see trade prices
 
FCB MOBILE ANTENNA BODY MOUNT manufactured by badland antennas
MOBILE ANTENNA BODY MOUNT (Product ID: FCB)
Description Fully molded feeder entry cable body mount antenna, suitable to accept hinge adaptor (HAL) drill hole 12.5mm suitable for mounting on vehicle bodies or any other outdoor applications.
Frequency ,
Polarity N/A
Gain N/A
VSWR N/A
Dimensions Height: 19MM    Width: N/A    Length: N/ADiameter: BASE DIAMETER 31MM
Cable 5.00 metres of RG58CU
Connector N/A
Power 35 WATTS
Impedance 50 OHM
Trade Price Log on to see trade prices
© 2008 RW Badland Ltd, Unit 3, Providence St, Lye, Stourbridge, West Midlands, DY9 8HN
Tel: +44(0)1384 423160   Fax: +44(0)1384 895051 / 423958   Email: info@badland.co.uk
Enter Password
Log on to the badland antenna site

All the antennas manufactured by badland are RoHS compliant
Badland Antennas has offices in the UK and the US
 We manufacture all our antennas in our UK based factory
You can pay for your antennas using Visa, Mastercard, American Express and Maestro
Badland Antennas are members of the Low power radio association and the federation of communication services
Design & Development
by Wilkes Design